StreetDeck is designed for maximum flexibility in size and configuration, limited only to the 24″ x 24″ dimensions of the tiles used.
The modular design of StreetDeck, based around the use of 24″ x 24″ pavers or tiles, essentially permits the deck to be extended to any length, subject to site constraints and any local regulations.
For Parklet applications where the decks are installed on a roadway directly adjacent to the sidewalk, StreetDeck is most commonly supplied in either 12′ x 6′ or 32′ x 6′ configurations. This corresponds to the space occupied by one or two parallel parked cars respectively. However the deck may be extended indefinitely in practice, normally in 6′ increments which typically adds one extra planter and one extra 4′ long railing.
Where required, the deck may also be expanded in width to 8′.
Standard configurations with integrated planters and railings, include the following components:.
StreetDeck Size |
Planters |
Railings |
Pavers |
|---|---|---|---|
|
6' x 12'
|
4
|
3
|
18
|
|
6' x 14'
|
5
|
4
|
21
|
|
6' x 20'
|
6
|
5
|
30
|
|
6' x 26'
|
7
|
6
|
39
|
|
6' x 32'
|
8
|
7
|
34
|
For other custom configurations, please contact Archatrak customer service.
Standard kits also include 12″ wide aluminum ramps which extend along the full length of the open side to span the gap between the deck and the sidewalk.
StreetDeck kits include all structural components, adjustable height pedestals, pavers, planters, mounting brackets, connectors and all bolts needed for assembly.
Modular decks, outdoor furniture, solar powered seating and illuminated planters for urban streets, commercial buildings and outdoor landscaping.
Copyright © 2022 Archatrak Inc.– All Rights Reserved